135 hitachi aic inc. tmcj test conditions jis c5101-1:1998 operating temperature range ?5? ~ +125? rated voltage dc2.5 ~ 20v 85? surge voltage dc3.2 ~ 26v 85? derated voltage dc1.6 ~ 13v 125? capacitance 0.68 ~ 22? capacitance tolerance ?0% paragraph 4.7, 120 hz leakage current tan paragraph 4.8, 120hz paragraph 4.26 thermal shock failure rate 1%/1000hours (ultra small package, 0603 size chip tantalum capacitor.) features ?rendered even smaller-sized thanks to accumulated technological know- how of tmcp. (reduced to about 1/3 the cabic volume of the tmcp type) ?suitable for high-density packaging essential to audio visual and other equipment downsizng. tinned plated terminals (sn 100) packing polarity code packing method code (t: carrier tape) capacitance tolerance code (m : 20%) capacitance code rated voltage code tmc j 0j 106 m t r f type of series case size code produt symbol : (example) tmcj series 6.3v 10 f 20% outline of drawings and dimensions case code case size l ?.1 w ?.1 h ?.1 r ?.15 a ?.1 j 1.6 0.8 0.8 0.3 0.6 dimensions (unit: mm) 0.2 or less c/c 20% or less tan specified initial value or less lc specified initial value or less refer to table standard porduct table c/c 20% or less tan specified initial value or less lc specified initial value or less c/c 20% or less tan 150% specified initial value or less lc specified initial value or less c/c 20% or less tan specified initial value or less lc 200% specified initial value or less c/c 20% or less tan specified initial value or less lc specified initial value or less product specifications paragraph 4.24 solder dip ? ? ? sec. reflow ? ? sec. paragraph 4.22, 40? 90 ~ 95%rh,500hours leave at -55?, normal temperature, 125?, and normal temperature for 30 min., 3 min., 30 min., and 3 min. repeat this operation 5 times running. paragraph 4.23, 85? the rated voltage is applied for 2000 hours. 85?. the rated voltage is applied (through a protective resistor of 1 ? /v). tmcj series standard value and case size anode indication belt mark l w w h a j case product (0603) specified initial value ?5 85 125 c/c ? 20 ~ 0% 0 ~ +20% 0 ~ +20% tan 0.2 0.3 0.2 0.3 value shown table or less lc 3 f g f s u p p s m f t t p s m f t t standard specified intial specified intial q s p e v d u u b c m f w b m v f p s m f t t w b m v f p s m f t t capacitance code rated voltage (v.dc) & |